Manual nozzle press

Introduction
This machine is suitable for small-scale manual welding of plastic nozzles/coffee valves/BIB valves/exhaust valves, etc.,
Ventilation source is available, skilled workers can produce more than 10,000 pieces per day, portable and quick to make profits
Suitable bag type

Technical parameter
Model: DX0030C2
Production speed: Φ5-Φ16, 500-1200 pcs/hour (speed depends on the proficiency of employees)
Wooden box with plywood size 0.6*0.4*0.8m
Weight, net weight of the equipment is 41kg, gross weight with wooden box is 54kg
Voltage: 220V/AC/50HZ/1200W
Air pressure: 0.2Mpa
Configuration: 1 cylinder, 1 mould, 1 control box, 1 bottom plate, detection control switch: 1 set.
Operation mode: power on the machine, connect the air pipe, fix the mold, adjust the positioning, turn on the thermometer switch, set the temperature, set the pressing time, put the suction nozzle into the bag, put it in the mold, press and check the press The effect can be adjusted by adjusting the air pressure and pressing time.