1. Outlet: the use of vacuum atomization (the film has better transparency)
2. film fixing device (to make both sides of the film more stable)
3. the use of online independent traction device: in the case of high-speed operation, the waste are more recycling
4. take-up roll: the use of high-quality steel and special processing sandblasting (the bubbles naturally excluded when the film is being produced in the coiling).
5. automatic host and return device: bulky shaft automatically up and down, easy to operate, save labor, improve work efficiency.
6. Especially suitable for stretch film machine more than 1000-type, one person can operate, greatly reducing labor costs;

1. Reducer: International standard hard gear reducer : One set(low noise)

(1) Gear material: alloy steel

(2) The main process of gear: high-frequency surface hardening,fine grinding

(3) Gearbox lubrication: forced pump lubrication loop

(4) Gearbox cooling: forced water loop cooling oil temperature

2. Screw

(1) A screw diameter: Ф70mm ,B screw diameter Ф65mm

(2) Screw ratio: 30: 1;

(3) Production: 50-120kg / h

(4) Width of product: 1000mm 500mmx2

(5) Installation size: 8000x2500x3000mm

(6) Structure: shielded mixing;

(7) Inlet: Forced water circulation cooling device

(8) Material: 38CrMoAl, hard chromium plated screw surface;

(9) Processing Technology: Forging, tempering, nitriding

3. Host: Extruder

(1) Screw extrusion, length 2100mm, B screw 1950mm

(2) A Host motor power: 22KW, B Host motor power: 18.5kw, 4-phase three-phase asynchronous motor

(3) Motor control mode: variable-frequency control, A  frequency converter: 22kw, B  frequency converter: 18.5kw, Vector inverter

(4) Screw heating power: A screw: 18kw, B screw heating power: 15kw, stainless steel heating coil

(5) Reducer: A reducer: 173 # B146 # ,hard gear

(6) Host feed inlet: high bucket

(7) feeding method: automatic suction; 2 vacuum suction machine 300G

(8) Automatic temperature control: 7 districts

(9) smart digital form:

(10) low-voltage electrical configuration:

(11) heating shell: stainless steel safety

(12) Filtering method: labyrinth structure

4. Die head

(1) Width: 1250mm

(2) Structure: double co-extruded T-type

(3) Process principle: special design, using two different shunt

(4) Material and processing: high-quality steel, quenched and tempered, grinded the inside surface, polished mirror plating

(5) Outlet: vacuum atomization (to make the film have better transparency)

(6) Film fixing device (to make both sides of the film more stable)

5. Traction winder

(1) stretch winding machine: electric

(2) traction roller: seamless steel pipe (surface plating mirror polishing treatment)

(3) cooling roll: interlayer, with circulating water cooling

(4) Cooling roller diameter: 420mm

(5) cooling stretch: two gear reducer, fan-shaped swing, a number of aluminum roller

(6) Traction speed: 50-100m / min

(7) Stretched film thickness: 0.005-0.05mm

(8) cooling principle: universal joint, from the left into the right, water cooling

(9) Drive power: 2.2KW; inverter motor

(10) Drive speed: Sendier frequency control

(11) Film flatness: 360 ° adjustment of universal flat roll

6. Winding device

(1) mode: high-precision drive system, PLC computer automatic non-stop coil

(2) Cut off: Invisible knife cut off

(3) drive: brake deceleration motor and pneumatic control

(4) meters: PLC touch screen, digital display and alarm

(5) take-up reel width: 12500mm

(6) winding effective width: 1000mm

(7) trimming recycling device: waste online recycling machine

(8) Rewind shaft: Wavy expansion shaft, two

Note: Customers need to prepare

1. Water: This machine is water-cooled. Customers need to prepare 10T cold water tower or 6p chiller.

2. Electricity: The standard voltage of this machine is: 380V 50 / 60HZ. Customers need to prepare voltage power not less than 60kw.

3. Gas: Screw air compressor, the power can not be less than 5.5kw.

1. Q: Are you a factory or trading company?

A: We are a factory

2. Q: What certificate do you have?

A: We have ISO9001, SGS, GB4455 and CE certificate.

3. Q: How dose your factory do regarding quality control?

A: We have a special QC department in charge of product's quality.

4. Q: How long is the warranty period?

A: All of our products have one year warranty.

5. Q: What's the main market of your company?

A: we have customers all over the world.

6. Q: What is your delivery time?

A: Normally, It needs about 30 working days. The exact time depends on production management.

7. Q: Can we visit your machine operation in your factory?

A: We have own plastic making company, you can see the machine operation.

8. Q: Where is your factory located? How can we visit there?

A: Our factory located in dongshan economic Industry Zone, Ruian City, Zhejiang Province, CHina.

You can by air to Wenzhou Airport and by High-speed rain to Ruian Station.

Pre-sale service:

Professional sales staff for you to explain in detail the efficacy of products and methods of use, and according to the different circumstances of customers to provide you with such as plant, layout, design drawings, staff training and other technical services. Venture budget and advice.

Sale of services:

Professionals and training centers to provide you with comprehensive technical advice and training, fully understand the performance characteristics of the product, on-site training hands-on exercises, so that you not only bought equipment, but also mastered the technology.

After-sales service:

In particular, equipped with a number of excellent, experienced technical master to track the entire service to answer customers a variety of difficult problems to be

Seeking, but also visit customers regularly to help customers train technical staff.

WRITE TO US